Indexers & Rotary Tables
NC ROTARY TABLE
MR SERIES
MR120 – MR160 – MR200
Industry Standard Compact Rotary Table
- Minimum size in its class.
- Pneumatic spec.
- Powerful pneumatic clamping torque by triple disk brake system.
- High speed rotation.
- High accuracy.
- Rotary Joint built in as option.
- Ideal for compact machining centres.
*CE correspondence.
SAMPLE APPLICATION
Various trunnion systems available.
Table with T-slot can also be offered.
Only Kitagawa can offer this combination of NC Rotary Table and chuck.
MR250 – MR320
Industry Standard Compact Rotary Table
- Compact design.
- Pneumatic spec.
- Powerful pneumatic clamping torque by triple disk brake system.
- High speed rotation.
- High accuracy.
- Rotary Joint built in as option.
- Ideal for compact machining centres.
*CE correspondence.
SAMPLE APPLICATION
Specialist trunnion systems allow for multi surface or simultaneous machining.
HORIZONTAL/VERTICAL ROTARY TABLES
Features:-
- Due to the three dividing plates, division into the required number of sections is obtained with an accuracy of 1’.
- Dividing means of graduated drum with 1’30”.
- Parallelism of clamping surface to base 0.02mm.
- Flatness of clamping surface 0.02mm.
- True run-out of tapered centre bore 0.01mm.
- Squareness of clamping surface to angle face 0.02mm.
- Centering morse taper sleeves are hardened and ground, extending machine life.
- Possibility of worm wear compensation and worm disconnection from outside of the body.
- Depending on the size gear ratio is 1:60, 1:90, 1:120.
- High stiffness.
Standard accessories:
- Three dividing plates with clamping bolts.
- Slot nuts.
- Table lever.
- This tailstock is design for use with indexing fixtures, rotary tables and dividing heads.
- Height (H) is precisely adjusted by means of a screw and, after the adjustment, the spindle is locked in a vertical position.
- These tailstocks are designed for use with indexing fixtures, rotary tables and dividing heads.
HORIZONTAL/VERTICAL INDEXING FIXTURES
- Please choose your desired chuck for use with Type 5901 from the table.
- Simple and compact design provides for two types of indexing:
1) basic indexing – which is done by means of catch device in 2, 3, 4, 6, 8, 12 and 24 divisions.
2) angular indexing – which can be performed through sleeve with scale graduated in 360° in 1° increment.
3) alternative indexing – which can be performed by means of catch device and specified changeable dividing plate (with Z = 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 or 24 units number of divisions). To obtain required number of divisions replace Z = 24 plate with one of the above specified plates. - Indexing accuracy 2’.
- True run-out of tapered centre bore 0.02mm.
- Squareness (base to chuck) 0.02mm.
- Parallelism over face 0.02mm.
- Concentricity of mounting flange with precision or standard chuck 0.03 ÷ 0.06mm.
- Dividing plate made of high quality alloy steel, hardened and ground – extending machine life.
- Body made of stabilized cast iron.
- Please choose your desired chuck for use with Type 5911 from the table.
- Simple and compact design provides for two types of indexing:
1) basic indexing – which is done by means of catch device in 2, 3, 4, 6, 8, 12 and 24 divisions.
2) angular indexing – which can be performed through sleeve with scale graduated in 360° in 1° increment.
3) alternative indexing – which can be performed by means of catch device and specified changeable dividing plate (with Z = 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 or 24 units number of divisions). To obtain required number of divisions replace Z = 24 plate with one of the above specified plates. - Indexing accuracy 2’.
- True run-out of tapered centre bore 0.02mm.
- Squareness (base to chuck) 0.02mm.
- Parallelism over face 0.02mm.
- Concentricity of mounting flange with precision or standard chuck 0.03 ÷ 0.06mm.
- Dividing plate made of high quality alloy steel, hardened and ground – extending machine life.
- Body made of stabilized cast iron.
